1-mil polyester film with a proprietary, Therm-X based, thermosetting rubber adhesive system.

Non-corrosive rubber adhesive system resists degradation from chemicals and other contaminants.

A 1-mil polyester film with a proprietary Therm-X thermosetting acrylic adhesive system.

Designed for use as an outer wrap on capacitors and coils. Also excellent for bundling applications.

A 1-mil polyester film with a proprietary, Therm-X based, thermosetting rubber adhesive system.

Tough, thin and abrasion resistant. Features a non-corrosive adhesive system.

1-mil polyester film with a proprietary Therm-X thermosetting acrylic adhesive system.

Tough, conformable and thin, these products are used in electrical applications where good solvent resistance is required.

2-mil polyester film with a proprietary Therm-X thermosetting rubber adhesive system.

Coil banding, coil wrap. Designed to be conformable to many irregular surfaces.

A 2-mil polyester film with our proprietary, Therm-X based, thermosetting rubber adhesive system.

Tough and abrasion resistance, withstands temperature up to 130 degree celsius.

A 1-mil polyimide film tape with our Therm-X silicone thermosetting adhesive system.

High temperature silicone adhesive and puncture resistance. High conformable and withstands temperature up to 180 degree celsius

A 1-mil polyimide film with our Therm-X acrylic thermosetting adhesive system.

High temperature acrylic adhesive and puncture resistance. Highly conformable and withstands temperature up to 155 Degrees Celsius.

A woven polyester cloth substrate with our Therm-X rubber based thermosetting adhesive system.

Coil wrap for capacitors and transformers. Polyester cloth backing provides abrasion protection and puncture resistance.

A cotton cloth substrate with our Therm-X, rubber based, thermosetting adhesive system.

Designed for use as a coil wrap in transformers. Also excellent for hold down and bundling applications.

A polyester cloth substrate with a proprietary Therm-X rubber based thermosetting adhesive.

Coil wrapping and holding during transformer construction, bundling.

A 2-mil polyimide film tape with our Therm-X silicone thermosetting adhesive system.

Extreme puncture and temperature resistance with silicone adhesive that withstands temperatures up to 180 degree celsius

A glass cloth substrate with a proprietary Therm-X rubber based adhesive system.

Rubber adhesive system is designed to resist flagging and contamination from varnish chemicals and solvents. Complies with U.S Government Specification MIL-I-15126

A glass cloth substrate with a proprietary Therm-X silicone adhesive system.

Glass cloth with pre-cured high temperature silicone adhesive system. Combines high heat resistance and extremely high abrasion resistance. Electrical insulation and high temperature masking.

A durable woven glass cloth tape with a high temperature silicone adhesive.

Coil wrap, banding, crossover insulation, and high temperature splicing and masking.

A polyester film and reinforced polyester non-woven laminate with our Therm-X rubber based thermosetting adhesive system.

Composite polyester film/non-woven reinforced tape with thermosetting rubber adhesve system.

A polyester film and reinforced polyester non-woven laminate with our Therm-X rubber based thermosetting adhesive system.

Designed for use in holding and insulation applications during transformer and coil manufacturing. Excellent for hold down, bundling, slot edging, and as a barrier layer.

Polyester film and glass filament tape coated with an aggressive rubber thermosetting adhesive system.

Good for heavy duty holding applications. Used for bundling motor and transformer coils, separating ground insulation, slot edging, and anchoring.

Polyester film and glass filament tape coated with an aggressive acrylic adhesive system.

Good for heavy duty holding applications. Used for bundling motor and transformer coils, separating ground insulation, slot edging, and anchoring.