Ideal Tape 288 is a pressure sensitive tape manufactured with a high strength nominal 2.0 mil aluminum foil backing and a performanace acrylic adhesive system.

Used for sealing seams and as a vapor barrier in duct and pipe insulation systems.

Ideal Tape's 427 has a white metalized polypropylene, scrim, kraft paper backing and a performance rubber based adhesive system.

This product is used to seam and repair metal building insulation facing utilizing white Metalized polypropylene.

428 AWF is a pressure sensitive tape manufactured with the ASJ Foil/Scrim/Kraft facing used by most major manufacturers of ASJ faced insulation. UL 723 ratings (25/50)

Used for sealing cold and dual temperature duct and pipe systems where the basic insulation uses ASJ facing. The pre-cut discs (428D) are applied over washers and cupped pin heads or to repair any accidental punctures in the facing.

468 is a metallized polyethylene coated cloth tape with an aggressive natural rubber pressure sensitive adhesive.

468 is designed for use to seal seams on sheet metal duct systems where a metallized or aluminum appearance is desired. Also suitable for repairs to flexible duct systems.

Polyethylene coated cloth tape with an aggressive rubber pressure sensitive adhesive.

469 is a general use duct tape that is suitable for a variety of applications. Common uses include sealing seams and connections on heating and air conditioning duct systems, general purpose packaging, bundling and securing materials on the job site, and weather proofing.

Ideal Tape's 488 AWF is a pressure sensitive tape manufactured with a 2 mil aluminum foil backing and a performance adhesive system. UL 723 Rated.

This product is used with fiberglass duct-board and on all seams and joints. It provides a dependable vapor barrier when applied to clean, dry surfaces.

Ideal Tape's 488 ECO is a pressure sensitive tape manufactured with a 1.2 mil aluminum foil backing and a performance adhesive system. UL 723 Rated

This product is the thinnest, most cost effective aluminum foil tape.

Ideal Tapes's 488S is a pressure sensitive tape manufactured with a 1.5 mil aluminum foil backing and a performance rubber based adhesive system. UL 723 Rated

Standard grade aluminum foil with high tack rubber adhesive.

Ideal Tape's 491 is a pressure sensitive tape manufactured with the FSK Foil, skrim and kraft combined with a pressure sensitive adhesive and release liner. 491D is the same product in circular disc form provided in a continuous roll.

491 is used for sealing cold and dual temperature duct seams and joints where FSK is the basic insulation facing. The pre-cut discs (491D) are applied over washers and cupped pin heads. They can also be used to cover any accidental punctures in the facing. The discs provide an excellent vapor seal when applied to clean, dry surfaces. Use of applicator (provided) will give best results.

Ideal Cold Seal 728 is an All Service Jacket (ASJ) backing coated with a high performance acrylic adhesive system. UL 723 Rated.

Designed for sealing seams and joints on duct and pipe insulation systems where ASJ insulation facing is used. Ideal Cold Seal adhesive is formulated to deliver in demanding temperature conditions.

Ideal Cold Seal 788S is a 2 mil aluminum foil backing coated with a high performance acrylic adhesive system. UL 723 Rated.

Standard grade aluminum foil coated with performance acrylic adhesive designed for use in a wide temperature range.

Ideal Cold Seal 791 is a laminated foil/skrim/kraft (FSK) backing coated with a high performance acrylic adhesive system. UL 723 Rated.

Designed for sealing seams and joints on dust and pipe insulation systems where FSK is the insulation facing. Ideal Cold Seal ashesive is formulated to deliver in demanding temperature conditions.

Ideal Tape's Flex Seal 450 is a printed polypropylene film with a high performance acrylic adhesive system. UL 181B-FX approved

Specifically designed for use as a closure system on flexible air ducts and connections.

Ideal Tape's Flex Seal 457 is a printed polyethylene coated cloth duct tape with a high performance adhesive system. UL 181B-FX approved

Specifically designed for use a closure system on a flexible air ducts and connections. It can also be used for sealing metal duct and metal connections in HVAC systems.

Ideal Seal 2000 is a performance grade aluminum foil tape coated with an acrylic adhesive system. Ideal Seal 2000 meets both UL 181A-P and UL 181B-FX standards for use on duct closure systems and is printed for identification.

Ideal Seal 2000 is a dual use product designed for use as a vapor seal and to ensure the integrity of seams and joints on both fiberglass duct board and flexible duct systems.

Ideal Seal 490 is a heat activated foil tape that offers a consistent and dependable closure method for fiberglass duct board systems. The product is made with a laminated aluminum foil/fiberglass skrim backing, and a heat activated adhesive system. UL 181-A listed for use on all fiberglass duct board insulation systems.

Ideal Seal 490 is designed for use in sealing joints and seams in fiberglass duct board insulation systems. Use of an approved heating iron or closure machine is recommented to achieve maximum performance.

Ideal Seal 587 A/B is a professional grade aluminum foil tape coated with a high performance acrylic adhesive system. 587 meets UL 181A-P standards for use on fiberglass duct closure systems and UL 181B-FX standards for use on flexible duct closure systems. Product is printed for identification.

Ideal Seal 587 A/B is a dual use product designed to ensure the integrity of seams and joints on both fiberglass duct board and flexible duct systems.

Ideal Seal is a high performance 6-ply laminate that provides a total vapor barrier and complete moisture protection for insulation cladding and jacketing applications. The 777 system delivers reliable performance in both indoor and outdoor new construction and retrofit applications. Ideal Seal 777 comes with a 10 year warranty without paint.

Heavy duty aluminum foil laminate; puncture/tear resistant, zero perm. Light weight alternative to metal in radiant heat reflective applications. Excellent as a patch or repair tape.