A polyester film with a pressure sensitive silicone thermoset adhesive system. Designed to perform in masking applications requiring high chemical resistance. Also excellent for splicing applications requiring high performance silicone adhesives.

Composite Bonding, Electrical & Electronic

A strong tear resistant polyester film combined with a high temperature resistant, proprietary blended rubber adhesive. Designed to meet the demanding temperature and pressure conditions of autoclave and composite bonding applications.

Composite Bonding, Hold Down, Electrical & Electronic

A polyester film coated with silicone adhesive. Designed for maximum performance in splicing and masking applications requiring abrasion protection, chemical resistance, and high temperature performance.

Composite Bonding, Electrical & Electronic

9248 is a polyester film tape with a high performance silicone pressure sensitive adhesive system. Designed for maximum performance in composite bonding, masking, and silicone web splicing applications.

Composite Bonding, Hold Down, Electrical & Electronic

A Nylon (polyamide) film tape with a high temperature resistant rubber based pressure sensitive adhesive system. Designed to meet the demanding temperature and pressure conditions of autoclave and composite bonding applications where silicone contamination is unacceptable

Composite Bonding, Electrical & Electronic

A polyester film tape with a high temperature resistant rubber based pressure sensitive adhesive system. Designed to meet the demanding temperature and pressure conditions of autoclave and composite bonding applications where silicone contamination is unacceptable.

Composite Bonding, Hold Down, Electrical & Electronic

9548 is a polyester film tape with a high performance silicone pressure sensitive adhesive system. Designed for maximum performance in composite bonding, masking, and silicone web splicing applications.

Composite Bonding, Electrical & Electronic

A polyester film tape with a high temperature resistant rubber based pressure sensitive adhesive system. Designed to meet the demanding temperature and pressure conditions of autoclave and composite bonding applications where silicone contamination is unacceptable.

Composite Bonding, Electrical & Electronic

2-mil polyester film with a proprietary Therm-X thermosetting rubber adhesive system. Coil banding, coil wrap. Designed to be conformable to many irregular surfaces.

Composite Bonding, Hold Down, Electrical & Electronic

702-5 is a tear resistant polyester film tape with a high performance silicone free pressure sensitive adhesive system. Product is laminated to a release liner. Provides excellent performance as a hold down tape in Airframe and Aircraft manufacturing operations and processing of honeycomb fillers.

Composite Bonding, Hold Down, Honeycomb Fabrication, Electrical & Electronic

High adhesion double coated natural cloth tape with a silicone coated release liner. Holds surfaces together under demanding conditions. Conforms readily to irregular surfaces and performs superbly under stress. Perfect for carpet hold down.

Designed to provide excellent bonding strength under demanding shear conditions in manufacturing operations. Offers superior performance as a carpet tape.

IT-7300 is a glass cloth tape with a silicone adhesive system. Designed for use in electrical insulation and other general applications where higher adhesion strength and thickness is required. Glass cloth backing provides abrasion protection and puncture resistance.

Composite Bonding, Electrical & Electronic

489 is an aluminum foil with pressure sensitive acrylic adhesive without liner. Meets federal Specifications for LT-80-B and Military Specification MIL-T-23397 B. This product can be used as a water proofing vapor barrier and air leakage protection. High reflectivity assures effective heat light interference and electrical isolation shielding. Excellent protection for masking operations in electroplating and painting operations.

Painting & Stripping, Electronical & Electronic, Moisture Barrier

488 is a 2 mil, alloy aluminum foil with a pressure sensitive adhesive and paper liner.

Performance aluminum coated with high tack rubber adhesive. Fast, permanent bonds.

489 is an aluminum foil with pressure sensitive acrylic adhesive without liner. Meets federal Specifications for LT-80-B and Military Specification MIL-T-23397 B. This product can be used as a water proofing vapor barrier and air leakage protection. High reflectivity assures effective heat light interference and electrical isolation shielding. Excellent protection for masking operations in electroplating and painting operations.

Painting & Stripping, Electronical & Electronic, Moisture Barrier

Ideal Tape's 427 has a white metalized polypropylene, scrim, kraft paper backing and a performance rubber based adhesive system.

This product is used to seam and repair metal building insulation facing utilizing white Metalized polypropylene.

428 AWF is a pressure sensitive tape manufactured with the ASJ Foil/Scrim/Kraft facing used by most major manufacturers of ASJ faced insulation. UL 723 ratings (25/50)

Used for sealing cold and dual temperature duct and pipe systems where the basic insulation uses ASJ facing. The pre-cut discs (428D) are applied over washers and cupped pin heads or to repair any accidental punctures in the facing.

Ideal Tape's 491 is a pressure sensitive tape manufactured with the FSK Foil, skrim and kraft combined with a pressure sensitive adhesive and release liner. 491D is the same product in circular disc form provided in a continuous roll.

491 is used for sealing cold and dual temperature duct seams and joints where FSK is the basic insulation facing. The pre-cut discs (491D) are applied over washers and cupped pin heads. They can also be used to cover any accidental punctures in the facing. The discs provide an excellent vapor seal when applied to clean, dry surfaces. Use of applicator (provided) will give best results.

Ideal Cold Seal 791 is a laminated foil/skrim/kraft (FSK) backing coated with a high performance acrylic adhesive system. UL 723 Rated.

Designed for sealing seams and joints on dust and pipe insulation systems where FSK is the insulation facing. Ideal Cold Seal ashesive is formulated to deliver in demanding temperature conditions.

Ideal Tape's Flex Seal 450 is a printed polypropylene film with a high performance acrylic adhesive system. UL 181B-FX approved

Specifically designed for use as a closure system on flexible air ducts and connections.

Ideal Tape's Flex Seal 457 is a printed polyethylene coated cloth duct tape with a high performance adhesive system. UL 181B-FX approved

Specifically designed for use a closure system on a flexible air ducts and connections. It can also be used for sealing metal duct and metal connections in HVAC systems.

Ideal Seal 2000 is a performance grade aluminum foil tape coated with an acrylic adhesive system. Ideal Seal 2000 meets both UL 181A-P and UL 181B-FX standards for use on duct closure systems and is printed for identification.

Ideal Seal 2000 is a dual use product designed for use as a vapor seal and to ensure the integrity of seams and joints on both fiberglass duct board and flexible duct systems.

Ideal Seal 490 is a heat activated foil tape that offers a consistent and dependable closure method for fiberglass duct board systems. The product is made with a laminated aluminum foil/fiberglass skrim backing, and a heat activated adhesive system. UL 181-A listed for use on all fiberglass duct board insulation systems.

Ideal Seal 490 is designed for use in sealing joints and seams in fiberglass duct board insulation systems. Use of an approved heating iron or closure machine is recommented to achieve maximum performance.

Ideal Seal 587 A/B is a professional grade aluminum foil tape coated with a high performance acrylic adhesive system. 587 meets UL 181A-P standards for use on fiberglass duct closure systems and UL 181B-FX standards for use on flexible duct closure systems. Product is printed for identification.

Ideal Seal 587 A/B is a dual use product designed to ensure the integrity of seams and joints on both fiberglass duct board and flexible duct systems.

Ideal Tape 288 is a pressure sensitive tape manufactured with a high strength nominal 2.0 mil aluminum foil backing and a performanace acrylic adhesive system.

Used for sealing seams and as a vapor barrier in duct and pipe insulation systems.

Ideal Tape's 488 AWF is a pressure sensitive tape manufactured with a 2 mil aluminum foil backing and a performance adhesive system. UL 723 Rated.

This product is used with fiberglass duct-board and on all seams and joints. It provides a dependable vapor barrier when applied to clean, dry surfaces.

Ideal Tape's 488 ECO is a pressure sensitive tape manufactured with a 1.2 mil aluminum foil backing and a performance adhesive system. UL 723 Rated

This product is the thinnest, most cost effective aluminum foil tape.

Ideal Tapes's 488S is a pressure sensitive tape manufactured with a 1.5 mil aluminum foil backing and a performance rubber based adhesive system. UL 723 Rated

Standard grade aluminum foil with high tack rubber adhesive.

Ideal Cold Seal 788S is a 2 mil aluminum foil backing coated with a high performance acrylic adhesive system. UL 723 Rated.

Standard grade aluminum foil coated with performance acrylic adhesive designed for use in a wide temperature range.

468 is a metallized polyethylene coated cloth tape with an aggressive natural rubber pressure sensitive adhesive.

468 is designed for use to seal seams on sheet metal duct systems where a metallized or aluminum appearance is desired. Also suitable for repairs to flexible duct systems.

Polyethylene coated cloth tape with an aggressive rubber pressure sensitive adhesive.

469 is a general use duct tape that is suitable for a variety of applications. Common uses include sealing seams and connections on heating and air conditioning duct systems, general purpose packaging, bundling and securing materials on the job site, and weather proofing.

Ideal Tape's Flex Seal 457 is a printed polyethylene coated cloth duct tape with a high performance adhesive system. UL 181B-FX approved.

Specifically designed for use as a closure system on flexible air duct and connections. Can also be used for sealing metal duct and metal connections in HVAC systems.

Ideal Cold Seal 728 is an All Service Jacket (ASJ) backing coated with a high performance acrylic adhesive system. UL 723 Rated.

Designed for sealing seams and joints on duct and pipe insulation systems where ASJ insulation facing is used. Ideal Cold Seal adhesive is formulated to deliver in demanding temperature conditions.

Ideal Cold Seal 788S is a 2 mil aluminum foil backing coated with a high performance acrylic adhesive system. UL 723 Rated.

Designed for sealing seams and joints on duct, duct wrap, and pipe insulation systems. Ideal Cold Seal adhesive is formulated to deliver in demanding temperature conditions.

Ideal Cold Seal 791 is a laminated foil/skrim/kraft (FSK) backing coated with a high performance acrylic adhesive system. UL 723 Rated.

Designed for sealing seams and joints on dust and pipe insulation systems where FSK is the insulation facing. Ideal Cold Seal ashesive is formulated to deliver in demanding temperature conditions.

Ideal Seal is a high performance 6-ply laminate that provides a total vapor barrier and complete moisture protection for insulation cladding and jacketing applications. The 777 system delivers reliable performance in both indoor and outdoor new construction and retrofit applications. Ideal Seal 777 comes with a 10 year warranty without paint.

Heavy duty aluminum foil laminate; puncture/tear resistant, zero perm. Light weight alternative to metal in radiant heat reflective applications. Excellent as a patch or repair tape.

Ideal Tape's 427 has a white metalized polypropylene, scrim, kraft paper backing and a performance rubber based adhesive system.

This product is used to seam and repair metal building insulation facing utilizing white Metalized polypropylene.

428 AWF is a pressure sensitive tape manufactured with the ASJ Foil/Scrim/Kraft facing used by most major manufacturers of ASJ faced insulation. UL 723 ratings (25/50)

Used for sealing cold and dual temperature duct and pipe systems where the basic insulation uses ASJ facing. The pre-cut discs (428D) are applied over washers and cupped pin heads or to repair any accidental punctures in the facing.

Ideal Tape's 491 is a pressure sensitive tape manufactured with the FSK Foil, skrim and kraft combined with a pressure sensitive adhesive and release liner. 491D is the same product in circular disc form provided in a continuous roll.

491 is used for sealing cold and dual temperature duct seams and joints where FSK is the basic insulation facing. The pre-cut discs (491D) are applied over washers and cupped pin heads. They can also be used to cover any accidental punctures in the facing. The discs provide an excellent vapor seal when applied to clean, dry surfaces. Use of applicator (provided) will give best results.

Ideal Cold Seal 728 is an All Service Jacket (ASJ) backing coated with a high performance acrylic adhesive system. UL 723 Rated.

Designed for sealing seams and joints on duct and pipe insulation systems where ASJ insulation facing is used. Ideal Cold Seal adhesive is formulated to deliver in demanding temperature conditions.

Ideal Cold Seal 791 is a laminated foil/skrim/kraft (FSK) backing coated with a high performance acrylic adhesive system. UL 723 Rated.

Designed for sealing seams and joints on dust and pipe insulation systems where FSK is the insulation facing. Ideal Cold Seal ashesive is formulated to deliver in demanding temperature conditions.

A 1-mil polyester film tape with a pressure sensitive silicone adhesive system.

Designed to perform in masking applications requiring high chemical resistance. Also excellent for splicing applications requiring silicone adhesives.

A 1-mil polyester film with a pressure sensitive silicone adhesive system.

Designed to perform in most masking applications in the production of printed circuit boards. Protects against splashes and fumes from the chemicals used in tin/lead stripping and gold finger plating operations.

A 1-mil polyester film with a pressure sensitive rubber thermoset adhesive system.

An excellent low tack protective tape. Protects the printed circuit board and copper from foreign parts and chemical attacks.

A 1-mil polyester film with a pressure sensitive silicone thermoset adhesive system.

Designed to perform in masking applications requiring high chemical resistance. Also excellent for splicing applications requiring high performance silicone adhesives.

A 1-mil polyester film backing with a silicone pressure sensitive adhesive system. Engineered for applications requiring no/low residue.

Designed to perform in all phases of masking operations for printed circuit board production. Protects circuitry from splashes and chemical fumes.

A 1 mil polyester film tape with a high performance silicone pressure sensitive adhesive system

Quick stick silicone adhesive, removes cleanly.

A 1-mil polyester film backing with a silicone pressure sensitive adhesive system.

Designed to perform in all phases of masking operations for printed circuit board production. Protects circuitry from splashes and chemical fumes. Engineered for applications requiring no/low residue.

A 1-mil polyester film tape with a pressure sensitive silicone adhesive system.

May be used in a wide variety of masking operations where conformability and clean, no residue, removal is critical. Can also be used in a variety of splicing applications.

A 1-mil polyester film backing with a pressure sensitive silicone adhesive system. This product is engineered for applications where no/low residue is a requirement.

Designed to perform in all phases of masking operations for printed circuit board production. Protects circuitry from splashes and chemical fumes.

A 1-mil polyimide film with a silicone pressure sensitive adhesive system.

Engineered to protect gold fingers during the wave solder process.

A 2-mil polyimide film with a silicone pressure sensitive adhesive system.

Engineered to protect gold fingers during the wave solder process.

A polyester film and reinforced polyester non-woven laminate with our Therm-X rubber based thermosetting adhesive system.

Composite polyester film/non-woven reinforced tape with thermosetting rubber adhesve system.

A polyester film and reinforced polyester non-woven laminate with our Therm-X rubber based thermosetting adhesive system.

Designed for use in holding and insulation applications during transformer and coil manufacturing. Excellent for hold down, bundling, slot edging, and as a barrier layer.

Polyester film and glass filament tape coated with an aggressive rubber thermosetting adhesive system.

Good for heavy duty holding applications. Used for bundling motor and transformer coils, separating ground insulation, slot edging, and anchoring.

Polyester film and glass filament tape coated with an aggressive acrylic adhesive system.

Good for heavy duty holding applications. Used for bundling motor and transformer coils, separating ground insulation, slot edging, and anchoring.

A glass cloth substrate with a proprietary Therm-X rubber based adhesive system.

Rubber adhesive system is designed to resist flagging and contamination from varnish chemicals and solvents. Complies with U.S Government Specification MIL-I-15126

A glass cloth substrate with a proprietary Therm-X silicone adhesive system.

Glass cloth with pre-cured high temperature silicone adhesive system. Combines high heat resistance and extremely high abrasion resistance. Electrical insulation and high temperature masking.

A durable woven glass cloth tape with a high temperature silicone adhesive.

Coil wrap, banding, crossover insulation, and high temperature splicing and masking.

1-mil polyester film with a proprietary, Therm-X based, thermosetting rubber adhesive system.

Non-corrosive rubber adhesive system resists degradation from chemicals and other contaminants.

A 1-mil polyester film with a proprietary Therm-X thermosetting acrylic adhesive system.

Designed for use as an outer wrap on capacitors and coils. Also excellent for bundling applications.

A 1-mil polyester film with a proprietary, Therm-X based, thermosetting rubber adhesive system.

Tough, thin and abrasion resistant. Features a non-corrosive adhesive system.

1-mil polyester film with a proprietary Therm-X thermosetting acrylic adhesive system.

Tough, conformable and thin, these products are used in electrical applications where good solvent resistance is required.

2-mil polyester film with a proprietary Therm-X thermosetting rubber adhesive system.

Coil banding, coil wrap. Designed to be conformable to many irregular surfaces.

A 2-mil polyester film with our proprietary, Therm-X based, thermosetting rubber adhesive system.

Tough and abrasion resistance, withstands temperature up to 130 degree celsius.

A 1-mil polyimide film tape with our Therm-X silicone thermosetting adhesive system.

High temperature silicone adhesive and puncture resistance. High conformable and withstands temperature up to 180 degree celsius

A 1-mil polyimide film with our Therm-X acrylic thermosetting adhesive system.

High temperature acrylic adhesive and puncture resistance. Highly conformable and withstands temperature up to 155 Degrees Celsius.

A 2-mil polyimide film tape with our Therm-X silicone thermosetting adhesive system.

Extreme puncture and temperature resistance with silicone adhesive that withstands temperatures up to 180 degree celsius

A woven polyester cloth substrate with our Therm-X rubber based thermosetting adhesive system.

Coil wrap for capacitors and transformers. Polyester cloth backing provides abrasion protection and puncture resistance.

A cotton cloth substrate with our Therm-X, rubber based, thermosetting adhesive system.

Designed for use as a coil wrap in transformers. Also excellent for hold down and bundling applications.

A polyester cloth substrate with a proprietary Therm-X rubber based thermosetting adhesive.

Coil wrapping and holding during transformer construction, bundling.

505 is a 1 mil metallized polyester film with an acrylic adhesive system

Designed for labeling, splicing, and holding applications. Provides high temperature performance and a decorative finish

A specially formulated, high-tack silicone adhesive on a 1 mil polyester film. This aqua colored tape is engineered for peak performance in splicing applications.

Designed for splicing webs of various siliconized release papers and films.

2 mil polyester film coated with 1.3 mils of silicone adhesive.

Designed to perform in a variety of splicing applications where chemical resistance and resistance to heat degradation are desired.

2 mil polyester film coated with 1.3 mils of silicone adhesive.

Designed to perform in a variety of splicing applications where chemical resistance and resistance to heat degradation are desired.

2 mil polyester film coated with 1.3 mils of silicone adhesive.

Designed to perform in a variety of splicing applications where chemical resistance and resistance to heat degradation are desired.

2 mil polyester film backing with a 1.3 mil silicone pressure sentisive adhesive system engineered for low/no residue applications.

2 mil polyester film backing with a 1.3 mil silicone pressure sentisive adhesive system engineered for low/no residue applications.

A 2 mil polyester film tape with a high performance silicone pressure sensitive adhesive system.

Heavy duty high temperature masking. High tear resistance.

A 2 mil polyester film tape with a high performance silicone pressure sensitive adhesive system.

Heavy duty high temperature masking. High tear resistance.

A 2-mil polyimide film with a silicone pressure sensitive adhesive system.

Engineered to protect gold fingers during the wave solder process.

High performance, heavy duty, single coated splicing tape.

Perfect for splicing heavy duty substrates where high temperature resistance and high shear strength are requested.

A 1-mil polyester film with a pressure sensitive silicone adhesive system.

Designed to perform in most masking applications in the production of printed circuit boards. Protects against splashes and fumes from the chemicals used in tin/lead stripping and gold finger plating operations.

A 1-mil polyester film backing with a silicone pressure sensitive adhesive system. Engineered for applications requiring no/low residue.

Designed to perform in all phases of masking operations for printed circuit board production. Protects circuitry from splashes and chemical fumes.

9182 is a 1 mil polyester film tape with a high performance silicone pressure sensitive adhesive system.

Quick stick silicone adhesive, removes cleanly.

A 1-mil polyester film backing with a silicone pressure sensitive adhesive system.

Designed to perform in all phases of masking operations for printed circuit board production. Protects circuitry from splashes and chemical fumes. Engineered for applications requiring no/low residue.

A 1-mil polyester film backing with a pressure sensitive silicone adhesive system. This product is engineered for applications where no/low residue is a requirement.

Designed to perform in all phases of masking operations for printed circuit board production. Protects circuitry from splashes and chemical fumes.

2 mil polyester film coated with 1.3 mils of silicone adhesive.

Designed to perform in a variety of splicing applications where chemical resistance and resistance to heat degradation are desired.

2 mil polyester film coated with 1.3 mils of silicone adhesive.

Designed to perform in a variety of splicing applications where chemical resistance and resistance to heat degradation are desired.

2 mil polyester film coated with 1.3 mils of silicone adhesive.

Designed to perform in a variety of splicing applications where chemical resistance and resistance to heat degradation are desired.

2 mil polyester film coated with 1.3 mils of silicone adhesive.

Designed to perform in a variety of splicing applications where chemical resistance and resistance to heat degradation are desired.

2 mil polyester film backing with a 1.3 mil silicone pressure sentisive adhesive system engineered for low/no residue applications.

High temperature masking applicatons.

A 1-mil polyimide film with a silicone pressure sensitive adhesive system.

Engineered to protect gold fingers during the wave solder process.

Nylon and polyester knit seam reinforcement tape

Designed for reinforcement of frontseams, backseams and sideseams for both boots and shoes

Nylon and polyester knit seam reinforcement tape

Designed for reinforcement of frontseams, backseams and sideseams for both boots and shoes

Ideal 200 is a heavy weight cotton fabric coated with our performance pressure sensitive adhesive system. Also available as #200-NF (dri-coat): Coated with a non-fray fabric finish.

Excellent for use in reinforcement applications for heavyweight leathers, fabrics, and foams.

Ideal 353 is a lightweight cotton knit fabric coated with a specialized non-fray finish and our performance pressure sensitive adhesive system. Also available as #353-HS: non-fray finished cotton knit with a heat activated adhesive system.

Excellent for use in seam reinforcement applications requiring a higher level of support and stability from a lightweight, low bulk, product. 353-HS is suitable for machine application.

Ideal 53 is a lightweight cotton fabric with our performance pressure sensitive adhesive system. Also available as 353: lightweight cotton fabric with a non-fray finish.

Excellent for use as lightweight reinforcement for back, front, and side seams in footwear and accessories.

Ideal 205 is a heavy weight cotton fabric coated with our performance heat activated adhesive system.

Excellent for use as a reinforcement material for thinner gauge leathers, fabrics, and foam components.

Ideal 53 is a lightweight cotton fabric with our performance pressure sensitive adhesive system. Also available as 353: lightweight cotton fabric with a non-fray finish.

Excellent for use as lightweight reinforcement for back, front, and side seams in footwear and accessories.

Ideal Tape offers a range of products for use in stay and general reinforcement applications. 3300 is a spun bonded non-woven, Trustay material, reinforcement tape.

Excellent for reinforcing throats, eyelets, uppers, straps, and perforations. All products are low stretch, and deliver strength in both directions. 3300 is available in self wound and with release liner versions. It is also available in double coated version.

Ideal Tape offers a range of products for use in stay and general reinforcement applications. 3601is a heavy duty spun bonded non-woven tape.

Excellent for reinforcing throats, eyelets, uppers, straps, and perforations. All products are low stretch, and deliver strength in both directions. 3601 is available in self wound and with release liner versions.

Ideal Tape's 5000 product are open cell, synthetic latex foams with our performance pressure sensitive adhesive system and a super calendared release liner.

Excellent for use as cushioning material in footwear heels and collars. Also provides support and insulation for work boot uppers. Synthetic foam is breathable and hypo allergenic. The release liner provides easy removal and efficient application.

Ideal Tape's 5300 product line are open cell polyurethane foams with our performance pressure sensitive adhesive system and a release liner.

Excellent for use cushioning heel tabs and collars in shoes and boots. Also provides support and insulation for work boot uppers. Foam has very good memory and the release liner provides easy removal and efficient application.

Ideal Tape's 5600 product line are open cell polyurethane foams with our performance pressure sensitive adhesive system and a release liner.

Excellent for use cushioning heel tabs and collars in shoes and boots. Also provides support and insulation for work boot uppers. Foam has very good memory and the release liner provides easy removal and efficient application.

Ideal Tape's 7000 product line are closed cell polyethylene foams with our performance pressure sensitive adhesive system and a release liner.

Excellent for use in reinforcing and supporting leather and fabric panels and bodies. Foam provides durability and long term memory and release liner provides easy removal and efficient application.

Our Topline product 62 is a high strength fabric tape that is coated with Ideal's performance shoe tape adhesive system.

Engineered to provide strength and reinforcement for consistent Topline construction.

Our Topline product 63 is a high strength fabric tapes that is coated with Ideal's performance shoe tape adhesive system.

Engineered to provide strength and reinforcement for consistent Topline construction. It is designed for reinforcement of both the top-line and stripping areas.

Ideal Tape's 900 TackSeal is a transfer adhesive system on a release liner.

Excellent for applications where components are placed prior to stitching.

Nylon Vamp Reinforcement Tape

Designed for use as a flexible reinforcement for throat, vamp linings and straps. Allows toe reinforcement in the lasting process without shadowing.

Double coated nylon cloth general reinforcement tape

For reinforcement of straps

Double sided cotton cloth tape with a high performance rubber adhesive system.

Designed for demanding applications that require heavy duty bonding strength.

High adhesion double coated natural cloth tape with a silicone coated release liner.

Holds surfaces together under demanding conditions. Conforms readily to irregular surfaces and performs superbly under stress.

5002 is a double sided nylon / cotton fabric tape with a high tack pressure sensitive adhesive system.

Designed for applications requiring high strength and stability

888 is a double sided polyester film tape with a high tack pressure sensitive adhesive system.

High tack adhesive system is UV and chemical resistant. Easy to use, fast, secure, and bonds to a variety of surfaces.

F002 is a double sided non-woven tape with a high tack pressure sensitive adhesive system.

Designed for applications requiring high stability.

880 SSL combines an aggressive high tack pressure sensitive adhesive system with both sides of a paper carrier.

General purposes double sided tape; holding, fixing and reinforcement.